Executive Components — Linear Cylinders
Slide Cylinder MXQ Series
LY-MXQ pairs a compact cylinder with a recirculating linear guide, bore-equivalent Φ8 to Φ35. Parallelism of 30 μm and verticality of 50 μm suit precision assembly and pick-and-place.
-
Bore
Φ6×2 / Φ8×2 / Φ12×2 / Φ16×2 / Φ20×2 / Φ25×2 -
Stroke
10~150 mm -
Pressure Range
0.1~0.7 MPa -
Operating Temp
-10~+60 ℃
- Recirculating linear guide, parallelism 30 μm and verticality 50 μm
- Twin-cylinder design, twice the output force
- Rubber stopper, hydraulic cushion or metal stopper selectable
- Stroke adjuster and end lock optional, built-in magnet
Product Intro
Our Product Range
Complete Product Portfolio
-
LINEAR CYLINDERSMini Cylinder MA SeriesLY-MA is a mini stainless steel cylinder with bores from 16mm to 63mm. A high-precision stainless tube with rolled end caps resists...Learn More -
PNEUMATIC GRIPPERSAir Gripper MHC2 SeriesLY-MHC2 is a pivot-type angular gripper covering bores Φ10 to Φ25. Fingers open to 30° and close to -10°, with a speed-control...Learn More -
PNEUMATIC GRIPPERSAir Gripper MHS2 SeriesLY-MHS2 is a parallel gripper covering bores Φ16 to Φ63. Repeatability of ±0.01 mm and high gripping force suit rigid, precise handling...Learn More -
PNEUMATIC GRIPPERSAir Gripper MHL2 SeriesLY-MHL2 is a wide parallel gripper with bores Φ10 to Φ40. Long finger stroke, a double piston and rack-and-pinion synchronization handle large...Learn More -
PNEUMATIC GRIPPERSAir Gripper MHZ2 SeriesLY-MHZ2 is a parallel gripper covering bores Φ6 to Φ40. Repeatability of ±0.01 mm and up to 180 cycles per minute suit...Learn More -
LINEAR CYLINDERSSlide Cylinder MXH SeriesLY-MXH is a compact air slide table with a linear guide, covering bores Φ6 to Φ20. Linear bearings raise non-rotating accuracy and...Learn More -
LINEAR CYLINDERSSlide Cylinder MXS SeriesLY-MXS is a twin-cylinder air slide table with cross roller guide, bore-equivalent Φ8 to Φ35. The cylinder and table form one unit,...Learn More -
LINEAR CYLINDERSDouble-Shaft Cylinder CXSW SeriesLY-CXSW is the double-rod version of the CXS dual-rod cylinder, bores 6mm to 32mm. It carries 2 to 3 times the allowable...Learn More
