Executive Components — Linear Cylinders
Compact Cylinder CQ2 Series
LY-CQ2 is a compact cylinder with bores from 12mm to 100mm. Single and double acting versions, rubber cushion and through-hole or tapped-body mounting make it a drop-in choice for tight installations.
-
Bore
Φ12/16/20/25/32/40/50/63/80/100 -
Stroke
5~100 mm -
Pressure Range
0.05~1.0 MPa -
Operating Temp
5~60 ℃
- Compact body with through-hole or tapped mounting
- Double acting and single acting (spring extend/retract) versions
- Rubber cushion for quiet stroke ends
- Built-in magnet version LY-CDQ2 for auto switches
Product Intro
Our Product Range
Complete Product Portfolio
-
LINEAR CYLINDERSMini Cylinder MA SeriesLY-MA is a mini stainless steel cylinder with bores from 16mm to 63mm. A high-precision stainless tube with rolled end caps resists...Learn More -
PNEUMATIC GRIPPERSAir Gripper MHC2 SeriesLY-MHC2 is a pivot-type angular gripper covering bores Φ10 to Φ25. Fingers open to 30° and close to -10°, with a speed-control...Learn More -
PNEUMATIC GRIPPERSAir Gripper MHS2 SeriesLY-MHS2 is a parallel gripper covering bores Φ16 to Φ63. Repeatability of ±0.01 mm and high gripping force suit rigid, precise handling...Learn More -
PNEUMATIC GRIPPERSAir Gripper MHL2 SeriesLY-MHL2 is a wide parallel gripper with bores Φ10 to Φ40. Long finger stroke, a double piston and rack-and-pinion synchronization handle large...Learn More -
PNEUMATIC GRIPPERSAir Gripper MHZ2 SeriesLY-MHZ2 is a parallel gripper covering bores Φ6 to Φ40. Repeatability of ±0.01 mm and up to 180 cycles per minute suit...Learn More -
LINEAR CYLINDERSSlide Cylinder MXH SeriesLY-MXH is a compact air slide table with a linear guide, covering bores Φ6 to Φ20. Linear bearings raise non-rotating accuracy and...Learn More -
LINEAR CYLINDERSSlide Cylinder MXQ SeriesLY-MXQ pairs a compact cylinder with a recirculating linear guide, bore-equivalent Φ8 to Φ35. Parallelism of 30 μm and verticality of 50...Learn More -
LINEAR CYLINDERSSlide Cylinder MXS SeriesLY-MXS is a twin-cylinder air slide table with cross roller guide, bore-equivalent Φ8 to Φ35. The cylinder and table form one unit,...Learn More
