Executive Components — Linear Cylinders
Double-Shaft Cylinder CXS Series
LY-CXS is a dual-rod compact cylinder with bores from 6mm to 32mm. A twin-cylinder layout gives twice the output force with high non-rotating accuracy and strong side-load resistance.
-
Bore
Φ6/10/15/20/25/32 -
Stroke
10~100 mm -
Pressure Range
0.1~0.7 MPa -
Operating Temp
-10~+60 ℃
- Twin-cylinder design delivers twice the output force
- Non-rotating accuracy ±0.1°
- Body mountable from four directions with selectable port position
- Workpiece mountable on three faces of the end plate
Product Intro
Our Product Range
Complete Product Portfolio
-
LINEAR CYLINDERSMini Cylinder MA SeriesLY-MA is a mini stainless steel cylinder with bores from 16mm to 63mm. A high-precision stainless tube with rolled end caps resists...Learn More -
PNEUMATIC GRIPPERSAir Gripper MHC2 SeriesLY-MHC2 is a pivot-type angular gripper covering bores Φ10 to Φ25. Fingers open to 30° and close to -10°, with a speed-control...Learn More -
PNEUMATIC GRIPPERSAir Gripper MHS2 SeriesLY-MHS2 is a parallel gripper covering bores Φ16 to Φ63. Repeatability of ±0.01 mm and high gripping force suit rigid, precise handling...Learn More -
PNEUMATIC GRIPPERSAir Gripper MHL2 SeriesLY-MHL2 is a wide parallel gripper with bores Φ10 to Φ40. Long finger stroke, a double piston and rack-and-pinion synchronization handle large...Learn More -
PNEUMATIC GRIPPERSAir Gripper MHZ2 SeriesLY-MHZ2 is a parallel gripper covering bores Φ6 to Φ40. Repeatability of ±0.01 mm and up to 180 cycles per minute suit...Learn More -
LINEAR CYLINDERSSlide Cylinder MXH SeriesLY-MXH is a compact air slide table with a linear guide, covering bores Φ6 to Φ20. Linear bearings raise non-rotating accuracy and...Learn More -
LINEAR CYLINDERSSlide Cylinder MXQ SeriesLY-MXQ pairs a compact cylinder with a recirculating linear guide, bore-equivalent Φ8 to Φ35. Parallelism of 30 μm and verticality of 50...Learn More -
LINEAR CYLINDERSSlide Cylinder MXS SeriesLY-MXS is a twin-cylinder air slide table with cross roller guide, bore-equivalent Φ8 to Φ35. The cylinder and table form one unit,...Learn More
